GEVINO Motore - PLC

PLC for controlling Motors

A Stepper motor or Two DC motors

TB67S128FTG Toshiba Driver

Constant current motore output 50V 5A (10A peak) per phase

Full step, Half step, Quarter step, 1/8 step, 1/16 step, 1/32 step, 1/64 step, 1/128 step.

On the Software, torque setting, frequency limits, selection of steps, Reading Current, ADMD setting: Advanced Dynamic Mixed Decay, Anti-stall,

5 digital inputs for PNP

4 Outputs PNP, protected against short circuit, 40V 2.5A, for resistive, inductive, capacitive, Loads.

3 analog inputs 20mA / 1V / 10V  12bit

1 RS485 port, which paralleling up to 255 gevini, or m-bus, or other.

On the front, behind the flap:

      SD card

      Micro USB

      Led inputs, outputs, serial, power

      Reset button

Optional module Ethernet RJ45

Optional module WiFi ESP

48 Mhz, 32-bit ARM Cortex - M0+ processor.
Flash 256KB, RAM 32K

3 enclosures, of different thicknesses:

Thin 17.5mm black, for the only card without accessories.

Medium 22.5mm green,for accessories such as Ethernet, RTC, Wi-Fi, Bluetooth, GSM modem.

Thick 35mm black, for accessories such as RS232 on DB9 female, Li-Po battery with battery charger.

Stepper

Brushed

   follow us on Facebook